Text preview for : 2SC4815.pdf part of Si, NPN



Back to : 2SC4815.pdf | Home

DATA SHEET

SILICON POWER TRANSISTOR

2SC4815
NPN SILICON EPITAXIAL TRANSISTOR FOR HIGH-SPEED SWITCHING

The 2SC4815 is a power transistor developed for high-speed switching and features low VCE(sat) and high hFE. This transistor is ideal for use as a driver in DC/DC converters and actuators. In addition, this transistor is available for the auto mount in the radial taping specifications and for mounting cost reduction.

FEATURES
· High hFE and low VCE(sat): VCE(sat) 0.3 V @IC = 3.0 A, IB = 0.15 A hFE 100 @VCE = 2.0 V, IC = 1.0 A · Available for auto mount in radial taping specifications

ABSOLUTE MAXIMUM RATINGS (Ta = 25°C) °
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Collector current (DC) Collector current (pulse) Base current (DC) Total power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC(DC) IC(pulse)* IB(DC) PT Tj Tstg Ratings 100 60 7.0 5.0 10 2.5 1.8 150 -55 to +150 Unit V V V A A A W °C °C

* PW 300 µs, duty cycle 10%

The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.

Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D15605EJ3V0DS00 (3rd edition) Date Published April 2002 N CP(K) Printed in Japan

©

2002 1998

2SC4815
ELECTRICAL CHARACTERISTICS (Ta = 25°C) °
Parameter Collector to emitter voltage Collector to emitter voltage Symbol VCEO(SUS) VCEX(SUS) Conditions IC = 5.0 A, IB = 0.5 A, L = 1 mH IC = 2.5 A, IB1 = -IB2 = 0.25 A VBE(OFF) = -1.5 V, L = 180 µH, Clamped VCB = 100 V, IE = 0 VEB = 7.0 V, IC = 0 VCE = 2.0 V, IC = 0.5 A VCE = 2.0 V, IC = 1.0 A VCE = 2.0 V, IC = 3.0 A IC = 3.0 A, IB = 0.15 A IC = 4.0 A, IB = 0.2 A IC = 3.0 A, IB = 0.15 A IC = 4.0 A, IB = 0.2 A VCB = 10 V, IE = 0 , f = 1.0 MHz VCE = 10 V, IC = 0.5 A IC = 3.0 A, RL = 17 , IB1 = -IB2 = 0.15 A, VCC 50 V Refer to the test circuit. Fall time tf 0.25 100 100 60 0.15 0.3 0.9 1.2 70 150 0.1 1.0 0.3 0.5 1.2 1.5 V V V V pF MHz 200 400 MIN. 60 60 TYP. MAX. Unit V V

Collector cutoff current Emitter cutoff current DC current gain DC current gain DC current gain Collector saturation voltage Collector saturation voltage Base saturation voltage Base saturation voltage Collector capacitance Gain bandwidth product Turn-on time Storage time

ICBO IEBO hFE1* hFE2* hFE3* VCE(sat)1* VCE(sat)2* VBE(sat)1* VBE(sat)2* Cob fT ton tstg

10 10

µA µA

µs µs µs

* Pulse test PW 350 µs, duty cycle 2%

hFE CLASSIFICATION
Marking hFE2 M 100 to 200 L 150 to 300 K 200 to 400

PACKAGE DRAWING (UNIT: mm)

TAPING SPECIFICATION

(OHFWURGH &RQQHFWLRQ %DVH &ROOHFWRU (PLWWHU or less

2

Data Sheet D15605EJ3V0DS

2SC4815
TYPICAL CHARACTERISTICS (Ta = 25°C) °

7RWDO 3RZHU 'LVVLSDWLRQ 37 :

$PELHQW 7HPSHUDWXUH 7D °&

,& 'HUDWLQJ G7

&DVH 7HPSHUDWXUH 7F °&

6LQJOH SXOVH

7UDQVLHQW 7KHUPDO 5HVLVWDQFH 5WKMD °&:

&ROOHFWRU &XUUHQW ,& $

&ROOHFWRU WR (PLWWHU 9ROWDJH 9&( 9

3XOVH :LGWK 3: V

3XOVH WHVW

&ROOHFWRU &XUUHQW ,& $

'& &XUUHQW *DLQ K)(

&ROOHFWRU WR (PLWWHU 9ROWDJH 9&( 9

&ROOHFWRU &XUUHQW ,& $

Data Sheet D15605EJ3V0DS

3

2SC4815

&ROOHFWRU 6DWXUDWLRQ 9ROWDJH 9&(VDW 9

3XOVH WHVW

%DVH 6DWXUDWLRQ 9ROWDJH 9%(VDW 9

3XOVH WHVW

&ROOHFWRU &XUUHQW ,& $

&ROOHFWRU &XUUHQW ,& $

&ROOHFWRU WR %DVH 9ROWDJH 9&% 9

*DLQ %DQGZLGWK 3URGXFW I7 0+]

&ROOHFWRU &DSDFLWDQFH &RE S)

&ROOHFWRU &XUUHQW ,& $

6ZLWFKLQJ 7LPH WVZ µV

&ROOHFWRU &XUUHQW ,& $

4

Data Sheet D15605EJ3V0DS

2SC4815
SWITCHING TIME (ton, tstg, tf) TEST CIRCUIT

%DVH FXUUHQW ZDYHIRUP

&ROOHFWRU FXUUHQW ZDYHIRUP

Data Sheet D15605EJ3V0DS

5

2SC4815

· The information in this document is current as of July, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. · No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. · NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. · Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. · While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. · NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4