Make | Model | Problem | Solution | Date |
| | | |
Found: 19
|
Alba | CTV11/12 | Dead | T301o/c, diode P600A o/c | 14-09-04 |
Alba | CTV11/12 | Dead apart from display & HT | Dry joints T201, Q208 o/c | 14-09-04 |
Alba | CTV11/12 | Int dead | R304 hi res | 14-09-04 |
Beko | 11.1 | Dead | R101 4R7 safety res in line dr feed o/c due to line dr tfmr having shorted turns (pri winding should read 4R2) pt no BE051709 | 14-09-04 |
Beko | 11.1 | E/W faulty & int blows LOPTr | C140 22nF across E/W mod diode | 14-09-04 |
Beko | 28128 11.1 | No video via scart | TDA8361 | 14-09-04 |
Beko | 28128NX 11.1 | Dead aft smoke | LOPTx u/s 058.541-TR1 R118 10k 0.5W in beam current sensing burnt R110 4.7R 0.5W fusible o/c in +200V supply | 14-09-04 |
Bush | BC6111 | Tuning drift. | Check/replace 9Z1 | 14-09-04 |
Finlux | 1111W | Dead; High HT; lack of height | HT was 166v (138v) due to set ht pot faulty also check Cap 1µ 63v in chopper feedback cct | 14-09-04 |
Fisher | FTX7111TX | Dead. | DU20 ( BY299 ) s/c , RU44 ( 0.1R , 1/4w ) o/c. | 14-09-04 |
|
Hitachi | G7PS C21119T | Field collapse int | D601 1N4002 flyback boost diode going int o/c | 14-09-04 |
ITT | CVC1110 | Int vertical jitter & poor line sync. | T860. | 14-09-04 |
LG | CI14B50F 11.1 | St/by only - no line dr | No 12v supply to line dr trfmr Tr101. Check back from pin 15 chopper trfmr - R410 0R1 o/c & dry joints chopper trfmr | 14-09-04 |
Matsui | 25M1 Mk111 | Dead - no lights with psu ticking | St/by tfmr Pt no PTO146a from CHS | 14-09-04 |
Philips | D16-111 33DC2080/25R | Dead with R3498 1k5 1/2w overheating | LOPTx faulty & replace resistor | 14-09-04 |
Philips | G111 25GR6771/79 | Dead, no st/by led | replace 2SC3975B (wont oscillate ) in primary of power supply | 14-09-04 |
Philips | G111S 25GR6771/56R | Lines at top of screen 10cm down screen | sm resistor 3807 (150R) | 14-09-04 |
Sanyo | CBP3011-15 | Dead | R320 & 321 120k hi res | 14-09-04 |
Sanyo | CBP3011-15 | Dead. | R320/21 ( 120k ) changed value. *WARNING smoothing cap charged* | 14-09-04 |