| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Nordmende | F9 Chassis (Control board with SAA1121/SAA1130/SAA1020) | Snow on screen, all leds lit, stuck on UHF band. | Change SAA1121. | 14-09-04 |
| Philips | 29PT9113C | WHITE BOX BOTTOM LEFT OF SCREEN | AUTO SUBTITLE SELECTED SWITCH OFF FROM HANDSET | 14-09-04 |
| Philips | CM11342 | Cutting out Int. | Poor connection on scan coil plug | 14-09-04 |
| Philips | CM11342 | Dead - squealing noise from PSU. | No 128v rail , R3412 ( 33k ) o/c. | 14-09-04 |
| Philips | MD2.22E 29PT9113 | at switch on green LED comes on for 10 secs, then switches to stby (red) | Micro M27C801100F1V00640 | 14-09-04 |
| Philips | MD2.22E 29PT9113 | bright red raster | R3351 120k o/c | 14-09-04 |
| Philips | MD2.22E 29PT9113 | no tuning | R3568 56k 0.5W on large signal panel (+40V supply to tuner) | 14-09-04 |
| Philips | MD2.22E 29PT9113 | white box with line in it at bottom LHS of the screen | auto subtitle selected, but not being transmitted, turn off with button under flap on R/C | 14-09-04 |
| Sharp | CV2113H | St/by only | STR41090 | 14-09-04 |