| Make | Model | Problem | Solution | Date |
| | | |
| Found: 8
|
| ITT | CT2600 CVC1210 | Dead - with ticking noise. | BU208A , T562 ( BD135 ) , R503 ( 100ohm ) if LOPTX hot change it. | 14-09-04 |
| ITT | CVC1210 | Blank raster & may have fly back lines. | R536 ( 33k ) burnt up.Change it plus T900 ( BC238 ) decoder | 14-09-04 |
| ITT | CVC1210 | Dead - power supply buzzing. | R744 o/c ( safety component ) check R503. | 14-09-04 |
| ITT | CVC1210 | Int Start up | Replace C731 & C733 both ( 10uF ) C713 C703 C701 lift Cathode D712 Add 1.8ohm in series | 14-09-04 |
| ITT | CVC1215 CVC1210 CVC1215 | BANG THEN DEAD or Blows fuse at switch on | C701 ( 10uF ) 350v | 14-09-04 |
| Network | NW1210 | Light screen RH side | C805 10µ 150v 110v decoupling cap | 14-09-04 |
| Samsung | C1210R | Blank white raster with fb lines | CRT cath volts low due to C512 22µ 160v in 115v supply dried up | 14-09-04 |
| Samsung | C1210R | St/by only | 11v HT line rises to 2.5v then off. D106 FR304 efficiency diode in LOP stage s/c | 14-09-04 |