| Make | Model | Problem | Solution | Date |
| | | |
| Found: 6
|
| Goodmans | 1430RA | No pic, relay clicks & LED lights | ZD301 9v1 zener s/c | 14-09-04 |
| Goodmans | 1430RA | No start up | R302 6.8k start-up O/C caused by short in TA8718N IC. Please note this Onwa variation Uses TA8718N in IC position IC 302 not the usual AN 5601K. | 14-09-04 |
| GOODMANS | 1430RA | POWER COMES ON BUT NO PICTURE | CHECK ZD301 FOR S/C DIODBZX55B9V1 (9.1V) | 14-09-04 |
| Goodmans | 1430RA | Waving bands of interference & venetian blind effect | C311 10µ 16v o/c near IC301 TA8718 | 14-09-04 |
| Goodmans | 1430RA (Onwa) | No col, lack of height/bottom cramp HT 112v as per manual | R302 6k8 in 8v startup supply hi res | 14-09-04 |
| Goodmans | 1430RA (Onwa) | No sound no cursor on the baragraph | Don't replace the eprom! Disconnect pin 4 IC601, turn on and turn up the volume using the remote. When cursor and sound appear, resolder without turning off then hit standby on the remote to save!! | 14-09-04 |