| Make | Model | Problem | Solution | Date |
| | | |
| Found: 11
|
| Matsui | 14T1 | St/by only | LOPTx SEME HR7511 | 14-09-04 |
| Sony | BE-4 KV14T1U | coloured lines on top | EEPROM IC002 ST24C02CB1 (875937032) | 14-09-04 |
| Sony | BE-4 KV14T1U | dead | LOPTr Q802 S2055N s/c, R615 0.46R (121737100) o/c, IC601 STRS5706 s/c | 14-09-04 |
| Sony | BE4 KV14T1U | Auto grey scale lines visible at top of screen | EPROM ST24C02CB1 IC002 faulty | 14-09-04 |
| Sony | BE4 KV14T1U | Dead - no led lit or flashing | 0.47R resistor from the 300volts input to the chopper TX
was O/C, replace STRS5706 chopper chip, still dead - LOPTr S2055N leaky If LOPTx is grey, R806 1.5R
with a 1.8R resistor Part number 1-216-352-11. | 14-09-04 |
| Sony | BE4 KV14T1U | Dead | cracks in print around loptx | 14-09-04 |
| Sony | KV14T1U | Dead | R614 0R47 | 14-09-04 |
| Sony | KV14T1U | LED flashing 6 times with a break of 1 sec between every 6 flashes. | Replace LOPT (Konig FAT30489 from Seme) | 14-09-04 |
| Sony | KV14T1U | Pic fades with flaring at sw on | crack by loptx (to crt htrs?) | 14-09-04 |
| Sony | KV14T1U | Sound at max | replace tact sws pt no SW01634 | 14-09-04 |
|
|
| Sony | KV14T1U BE4 | Bright white raster | check conns/cracks around LOPtx | 14-09-04 |