| Make | Model | Problem | Solution | Date |
| | | |
| Found: 6
|
| Bush | 1557NTX | Dead. | ZD402 Zenor , R422 ( 3.3R 2W ) , C909 , 910 ( 47uf ) , Z901 ( 8.2v ) , Z902 , Q904 | 14-09-04 |
| Bush | 1557NTX | If standby selected pic becomes dark & sound mutes | Q907 ( 2SC2335 ) | 14-09-04 |
|
|
| Bush | 1557NTX | No sound or raster - HT line Ok. | R919 ( 0.68ohm ) fusible o/c. | 14-09-04 |
| Bush | 1557NTX | White raster with flyback lines. | Check for 12v on ZD402 , if low check D404 & print between D404 & R422 | 14-09-04 |
| Bush | 1557NTX (Onwa) | Tuning missing | No 33v tuning supply due to broken print by scart socket - due to rough insertion of scart plug | 14-09-04 |
| Philips | 21CE1557/05B | Flickering pick at sides when warm | Replace C8092 (8µF bipolar with a 4.7µF 50v), C2611 (0.56µF - 200v not sure!), C2608 (4.7µF 50v bipolar), C2638 (470µF - when picture pulls on bright scenes) - R3665 (4R7) and D6665 (1N4148) when width varies with brightness. | 14-09-04 |