| Make | Model | Problem | Solution | Date |
| | | |
| Found: 7
|
| Amstrad | CTV2020/2028 Bush 2866 | Searches but finds no sigs | R124 15K 2W O/C located
behind the PSU in the centre nearest the front controls | 14-09-04 |
| Bush | 2028T (11AK10) etc | Standby is initiated when "Vol +" or "Vol -" selected | Corrupted memory IC502 - password reqd when replacing which requires a procedure too long to list here. See Serge's email on subject dated 26/10/00 | 14-09-04 |
| Bush | 2028T 11AK10-15 | Dead | Replace R809 (.47ohm) o/c-Q801(BUZ77B) s/c-R805 (330k) o/c - R821 (2.2ohm) surge limit o/c. | 14-09-04 |
| Goodmans | 1428T/2028T | No col, IC701 pin 26 0v, pin 33 low - no burst | C503 4n7 leaky | 14-09-04 |
| Goodmans | 2028T/2195T | Chans locked | XT01 27Mhz Xtal | 14-09-04 |
| Goodmans | 2028T/2195T | Chans locked | XT01 27Mhz Xtal | 14-09-04 |
| Goodmans | 2028T/2195T | LOCKED UP WITH NO CHANNEL CHANGE | REPLACE XT01 27MHZ CRYSTAL | 14-09-04 |