| Make | Model | Problem | Solution | Date |
| | | |
| Found: 8
|
| Beko | 20306NX | Dead - MOSFET 2SK1118 s/c | Only works short time aft replacement - chopper tfmr faulty | 14-09-04 |
| Beko | 2030T | Rapid tuning drift | R61 27k 2w | 14-09-04 |
| Grundig | CUC2030 | E/W poor | TDA8350 FOP chip | 14-09-04 |
| Grundig | CUC2030 | Hor black & white lines & no tuning | Sound MSP chip faulty - causing corruption to data lines | 14-09-04 |
| Grundig | CUC2030 | Hotel mode disabling | Sw set off at main Sw. Press "I" button & Sw on. In service menu change Hotel to "off" | 14-09-04 |
| Grundig | CUC2030 | Line collapse | dry joint scan coil plug & R55006 5R6 1/2w o/c causing no E-W | 14-09-04 |
| Grundig | CUC2030 | Menu access & child lock | hold the vol+ button on the remote and switch on the tv via
the on/ off switch.this results in the language menu coming up. if you then press ok the set goes straight to auto tune mode. if you then press text this stops auto tune and allows you access to all menus.entering the code 7038 cancels lock? | 14-09-04 |
| Grundig | CUC2030 | Parental lock | hold the vol+ button on the remote and switch on the tv via the on/ off switch.this results in the language menu coming up. if you then press ok the set goes straight to auto tune mode. if you then press text this stops auto tune and allows you access to all menus.entering the code 7038 cancels lock | 14-09-04 |