| Make | Model | Problem | Solution | Date |
| | | |
| Found: 7
|
| Bush | 2052T | Lack of contrast | R316 100k 1/2w between relay & FOP chip | 14-09-04 |
| Bush | 2052T | No sync - line or field | Remove black glue in area of IC301 | 14-09-04 |
| Bush | 2052T/A | No sound | Q616 2SC1815 in ident feed to micro IC601 (thinks there's no i/p signal) | 14-09-04 |
| Goodmans | 2052T ONWA | Stuck in standby. | C910 ( 100uf , 160v ) in LTB. | 14-09-04 |
| Pye | L6.1AA M2052/05 | Dead - off with a bang | Replace suspect LOPTx, s/c cap & s/c LOPTr
5422 LOPTx 20" L6 (4822 140 10561)
2422 560nF 5% 250V (4822 121 42634)
7422 BUT11APX (4822 130 10206 | 14-09-04 |
| Pye | M2052 | Dead - no line drive | Opto-coupler CNX82A - (line drive fed thro opto) | 14-09-04 |
| Samsung | CI20520BT | Dead - off with a bang | C805 2n2 800v split | 14-09-04 |