| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Bush | 2160NTX | Dead | UC3844 in psu, LOPTr MJF18204 s/c (used BUT12A in lieu) | 14-09-04 |
| Bush | 2160NTX G1000 | Bright raster with sound | No HT to RGBs - R315 10R pin 9 LOPTx o/c | 14-09-04 |
| Matsui | 2160 | DEAD CHANNEL LIGHTS ON | STR58041 | 14-09-04 |
| Matsui | 2160 | Dead with whine | D512 R2M diode across HT line s/c - also replace STR58041 as a precaution | 14-09-04 |
| Matsui | 2160 | Int start up - can go for days between | STR58041 chip | 14-09-04 |
| Matsui | 2160 | No pic sound ok | HT at LOPTr but no line drive; IC401 µPC1420CA o/p pin 26 reads wrong at 3v dc - chip faulty | 14-09-04 |
| Matsui | 2160 | noise at full vol with blank screen chan ind ok | lopt u/s - over ?70 | 14-09-04 |
| Matsui | 2160 | Small pulsing pic, with all volts low or dead - chan lights present | IC501 STR58041 chopper chip | 14-09-04 |
| Matsui | 2160/2180 | dead - chan display only | R503/4 150k suspect & STR58041 | 14-09-04 |