| Make | Model | Problem | Solution | Date |
| | | |
| Found: 10
|
| Mitsubishi | Euro 10 CT2525TX | Field collapse | no 12v to pin 3 of frame Ic due to o/c corroded print from leaky cap. | 14-09-04 |
| Mitsubishi | 2525 | dead | R909 330R D909 RD3.0FB2 (3 volt zener) (264P481060 | 14-09-04 |
| Mitsubishi | CT2525 | Dark pic - long time to come on | C906 100µ 50v leaky | 14-09-04 |
| Mitsubishi | CT2525 | Flyback lines at top of pic | C411 100µ near fop chip | 14-09-04 |
| Mitsubishi | CT2525 | Int dead esp when cold | C906 47µ 25v, C905 220µ 25v, C912 4µ7 50v | 14-09-04 |
| Mitsubishi | CT2525 | Int various inc no start up, display/analogue settings int | Check electrolytics in psu esp C956, C959, C962, & C964 | 14-09-04 |
| Mitsubishi | CT2525 | No Sound/pic with int trip - HT low | Z951 630mA fuible link | 14-09-04 |
| Mitsubishi | CT2525AV1BD | E/W faulty | L504 shorted turns - Pt no MITS409P749010 | 14-09-04 |
| Mitsubishi | CT2525TX | No start up after psu rebuild | D908 o/c - used 1N4148 | 14-09-04 |
| Mitsubishi | CT2525TX | St/by only - HT present but only 4v to 5v reg IC952 | C956 2200µ | 14-09-04 |