| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Mitsubishi | CT2532TX | Dead - line transistor checks Ok out of cct. | LOPTX s/c bt pins 2 & chassis. | 14-09-04 |
| Sony | AE-2A KVA2532U | int loss of sound | Q209 2SC2412K (mute transistor) | 14-09-04 |
| Sony | AE1B KVX2532U | Audio LH chan int goes to max with crackle | TDA6200 on Audio J panel sus. As this chip is expensive, commoned both o/p to good chan | 14-09-04 |
| Sony | AE1B KVX2532U | Int Txt & Lum (when ae plug wiggled) | Dry joints IC pins on Txt board | 14-09-04 |
| Sony | AE1C KVX2532U | Squegging line freq or dead if left on too long | Q804 LOPTr s/c due to dist line wfrm - R822 1k in Q805 coll feed o/c | 14-09-04 |
| Sony | AE2 KVE2532U | Poor sync, mosaic & odd cols | Dig comb filter | 14-09-04 |
| Sony | AE2A KVA2532 | Set up proc | Press & hold any 2 buttons on set whilst sw on.TT appears on top R/H of pic.
Press MENU on handset & select DEMO mode, press OK button - list of IC'S in set appears, e.g., to adj height, lin etc select CXD2018 & press "OK" button. Various adjusts appear on L/H side with present setting listed on R/H side ( a no. eg 0-100).Change settings using +/- or up/down keys on handset. Press OK to memorise. | 14-09-04 |
| Sony | KVE2532 | Settings (excess contrast/field cramp) off aft thunderstorm | Reset electronic screwdriver | 14-09-04 |
| Sony | KVX2532U | Nicam dropout | Adj orange variable cap on Nicam board | 14-09-04 |