| Make | Model | Problem | Solution | Date |
| | | |
| Found: 5
|
| Bush | 2866NTX SM2 | Txt missing | Short pin 20 of IC301 the micro to earth then switch on. Service menu should appear
Service- Telra V2.0; OP byte 1 OX OB; OP byte2 OX BO Init EEPROM.
Use P+/P- tp select the line to adjust and V+/V- to adjust.Bytes 1 and two must be as shown above.
To initialise the EEprom select the line and press V+/V- Correct handset reqd. | 14-09-04 |
| Bush | 2866NTX/SM2 | Blank white raster - sound ok | Jungle chip TDA8363AN3 | 14-09-04 |
| Bush | 2866NTX/SM2 | Line tearing when heated | C597 (22nF 400V) completely open circuit. | 14-09-04 |
| Bush | 2866NTX/SM2 | To access tuning mode | press and hold [MENU] button for at least 5 sec.
Then press and hold the white button for at least 5 sec to auto tune all the channels. Then use the green button to re-arrange the stored channels. | 14-09-04 |
| Bush | 2866NTX/SM2 | Won't store or loses chan store | This was cured by replacing memory 24C08 | 14-09-04 |