| Make | Model | Problem | Solution | Date |
| | | |
| Found: 16
|
| Goodmans | 286NS L6.3 | Blows BU1508AX | Loptx faulty pt no 482214010623 | 14-09-04 |
| Goodmans | 286NS L6.3 | Comes on then pic disappears into snow, sound ok then sw itself off etc | Replace 7505 BC337/40 & 7500 BC858B(situated on print side by 7505) also replaced 22uf 2511. | 14-09-04 |
| Goodmans | 286NS L6.3 | Dead - buzzing | L4520 gone hi pt no 482215750965, T7906 BU1508AX s/c | 14-09-04 |
| Goodmans | 286NS L6.3 | Dead - no LED | C2915 390nF 250v | 14-09-04 |
| Goodmans | 286NS L6.3 | E-W faulty | Replaced C2913 & C2915 | 14-09-04 |
| Goodmans | 286NS L6.3 | Ext 1 or 2 can't be selected using "0" button | 24C02AB1 EEPROM | 14-09-04 |
| Goodmans | 286NS L6.3 | Field collapse | R3908 2R2 0.33w o/c | 14-09-04 |
| Goodmans | 286NS L6.3 | Field partial collapse | R3988 2R2 fusible o/c | 14-09-04 |
| Goodmans | 286NS L6.3 | Int comes on at sw on | R3512 68k, R3513 330k, R3518 120k start up res | 14-09-04 |
| Goodmans | 286NS L6.3 | Lack of width, line speed off, no field sync | IC7100 TDA8361 | 14-09-04 |
|
|
| Goodmans | 286NS L6.3 | Line collapse | C2915 390nF o/c, R3929 220R & R3930 560R burnt | 14-09-04 |
| Goodmans | 286NS L6.3 | St/by only | Fusible 1502 o/c, when replaced Field collapse - crack in print to 7422 opto coupler | 14-09-04 |
| Goodmans | 286NS L6.3 | St/by only - faint buzzing | Cct Prot 1502 o/c pt no 482225251185 | 14-09-04 |
| Goodmans | 286NS L6.3 | St/by only - line drive unstable | Diode 6503 BYV10-40 leaky | 14-09-04 |
| Goodmans | 286NS L6.3 | St/by only, 5v line pulsing | D6505 BZX79C5V1 | 14-09-04 |
| Goodmans | 286NS L6.3 | Txt shifted laterally | 5420 15µH coil pt no 482215750965 | 14-09-04 |