Make | Model | Problem | Solution | Date |
| | | |
Found: 4
|
Toshiba | 28w23 | I have a toshiba 28w23 tv 11ak37 chassis picture is stretched and curved in at the sides e/w. picture mode button only changes the vertical height now not the horizontal. picturer stays stretched and curved. what could the problem be i have checked for dr | Presuming you have the manual for this set I'd suggest checking the e/w correction circuit which probably comprises of a transistor and a coil.another possibility is the eeprom has become corrupted causing the geometry settings to go out. | 11-07-05 |
Toshiba | 28W23B 11AK37 | Dead - off with a bang | IC800 pt no V30011968, Q801 V30001386, C860 V30000107, D892, 896 BA159, R805 & 852 33R 1/2w, Fuse F801 2.5A & check LOPTr BU2508AF | 14-09-04 |
|
Toshiba | 28W23B 11AK37 | Service mode entering | Press "Menu", then 4, 7, 2, 5 - to set geometry press Green fastext button | 14-09-04 |
Toshiba | 28W23B 11AK37 | St/by only - trips off at sw on | LOPTx | 14-09-04 |