| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Finlux | 3024 | BLACK BANDS ON SCREEN WORSE AT TOP | CK8 0.1uF ( UNDER FIELD HEATSINK ) | 14-09-04 |
| Finlux | 3024 | Int sync | Ra13 & Ra17 on sigs/IF panel never been soldered | 14-09-04 |
| Finlux | 3024 | There was intermittent loss of line and field sync | One end of both Ra13 and Ra17 had never been soldered. | 14-09-04 |
| Finlux | 3024F | LINE TRANSISTOR SC REPLACEMENT BLOWS AFTER 2-3hrs | Tz3 LINE DRIVER US + DRY JOINTS | 14-09-04 |
| Finlux | 3024F | No pic - faint vert line down centre at sw off | C219 scan coupling cap 470nf 250v split | 14-09-04 |
| Finlux | 3024F | No signals received - ok on scart | ICi1 SDA3203-3 | 14-09-04 |
| Sanyo | 3024 PORTABLE | S.C. LOP. TRANSISTOR , VERY HIGH HT. | CHECK Q511 2SA608 PRIMARY ( CHECK HT SMOOTHING FOR POSS DAMAGE ) | 14-09-04 |
| Sanyo | A3 CBP3024 | dead | LOPTr Q432 2SD1649 s/c, R555 47k o/c | 14-09-04 |
| Sanyo | CBP3024 | NO SOUND | OC. PRINT EDGE OF PCB | 14-09-04 |