| Make | Model | Problem | Solution | Date |
| | | |
| Found: 10
|
| Toshiba | 28MW7DB, 32MW7DB | Pic shift to right 3 -4", can be correected in serv mode but OSD still shifted | C4403 pin 4 IC Q420 dry joint | 14-09-04 |
| Toshiba | 28MW7DB, 32MW7DB | Various - freeze frame of noise, line speed off, no sync & slow motion pic | Low ampl VD pulse from IC501 pin 31 (0.9v instead of 5v p-p) - chip faulty | 14-09-04 |
| Toshiba | 28MW7DB/G 32MW7DB/G | Freeze frame of noise/no sync/slo-mo pic etc | VD pulse o/p pin 31 IC501 low amplitude (0.9v p-p instead of 5v p-p). IC501 Q501 part no B0385990 faulty | 14-09-04 |
| Toshiba | 32MW7DB | int sound from right channel with clicking noise | cut excess lead from C641 (shorting to nearby tracks) | 14-09-04 |
| Toshiba | 32MW7DB | No col - only pattern ; ok on atten signal | TA1259N Q501 | 14-09-04 |
| Toshiba | 32MW7DB | pic blanks off intemittently, green LED flashes | resolder Xtal XF01 on text module | 14-09-04 |
| Toshiba | 32MW7DB | Service mode access | press "Mute" on remote , then press & hold "Mute" on the remote again while pressing the "Menu" button on the TV. | 14-09-04 |
| Toshiba | 32MW7DB | service mode/ design mode | press MUTE on R/C once, then press and hold again while pressing MENU on front panel. 'S' appears on top right corner. To switch to design mode hold CALL on R/C while pressing MENU on TV, 'S' on screen should turn to 'D'. | 14-09-04 |
| Toshiba | 32MW7DB | very slow channel change, OSD oversized, text problems (intermittent) | fit Toshiba mod kit TSN10467 | 14-09-04 |
| Toshiba | 32MW7DB | when a dark object appears on bright background, overal picture brightness increases, then settles to normal | wrong option codes. Enter design mode and change options BS2, 2BS2, 3BS2, WBS2, NBS2 from 0BH to 07H | 14-09-04 |