| Make | Model | Problem | Solution | Date |
| | | |
| Found: 18
|
| Beko | 25411ND | Bright raster with sound | Pic can be restored by altering A1 or Focus control - CRT faulty | 14-09-04 |
| Beko | NR28411ND | Dead | Check the following-IC 601 44608P40-CKU8 chopper control chip., T601 K2545 FET device., R611 1K, R639 15R, R606 & R607 0.47R, R609 68K, D601 IN4004, Posistor | 14-09-04 |
|
|
| Beko | NR28411ND | Dead with 2.5A fuse o/c | R639 15R 1/2w, R606/7 0R47 1/2w, IC601 MC44608P40 & Chopper Tr T601 K2545 | 14-09-04 |
| Boots | CTV1411R | Dead. | R802/3 ( 15k , 0.5W ) o/c. | 14-09-04 |
| Bush | 1434 11AK20M-3 | Int tuning - no sigs | resolder SMD`s around R584 / R521, located on underside of PCB near IC501 | 14-09-04 |
| Bush | 1434 11AK20M-3 | Shuts down with ticking noise | D604 BA157 s/c | 14-09-04 |
| Goodmans | GTV69W3BLU4 11AK19pro | R629 value | 2R7 in 28" 4:3; 27R in 28" widescreen; 44R in 32" widescreen | 14-09-04 |
| Goodmans | TVC141/142 | Vol locked in mid posn | EEPROM 24C08P | 14-09-04 |
| Goodmans | TVC141/142 | VOLUME LOCKED | REPLACE EEPROM | 14-09-04 |
| Grundig | CUC4411 | Col int | Replace sub carrier osc trimmer with a 15pFcap | 14-09-04 |
| Hitachi | C1411T | No Txt , r/c & chan skipping | txt chip IT01 xtal osc inop. XT01 replaced | 14-09-04 |
| Hitachi | C1411T | only store 1 chan - in skip mode & r/c locks | 27Mhz xtal in txt pcb | 14-09-04 |
| Minato | ST1411 | No start up | Replace R502 (100k 1w) in the start-up supply line of the power supply. | 14-09-04 |
| Minota | ST1411 | Dead | R502 100k iw - beware the mains smoother charged! | 14-09-04 |
| Minota | ST1411 | Dead | 100k R502 1 watt metal film resistor | 14-09-04 |
| Perdio | CT1411 Onwa | Field collapse | R414 12R o/c, ZD401 12v zener s/c - also check C909 47µ 50v, C910 10µ 50v & ZD901 8v2 zener | 14-09-04 |
| Sharp | C1411HD | St/by only | IC701 STR40090 | 14-09-04 |
| Sony | BE-2A KVM1411U | tuning drift | resolder L501, also resolder R818 back of PCB near LOPTx | 14-09-04 |