| Make | Model | Problem | Solution | Date |
| | | |
| Found: 6
|
| Goldstar | CIS4441 | Bright white raster - sound ok | Replaced R424/425 Ibeam res under loptx - - A1 setting VERY critical | 14-09-04 |
| Goldstar | CIS4441 | Brightness excessive with pic appearing only briefly at sw on | Check/replace resistors 680k on crt base | 14-09-04 |
| Grundig | CUC4410 | Dead - BU508A LOPTr s/c | TDA8140 chip giving dist line pulses - chip was casue of problem | 14-09-04 |
| Grundig | CUC4410 | Excess width | D7102 ZPD30 in E/W module s/c | 14-09-04 |
| Grundig | CUC4410 | No pic - sound ok - no line drive | Comes from IC526 TDA8140 which was dry jointed & faulty | 14-09-04 |
| Grundig | CUC4411 | Col int | Replace sub carrier osc trimmer with a 15pFcap | 14-09-04 |