| Make | Model | Problem | Solution | Date |
| | | |
| Found: 41
|
| Alba | CTV4800 | No sound | Q201 2SC2703 faulty, TDA1904 audio chip faulty | 14-09-04 |
| Alba | CTV4805 | St/by only | D905 (BA157) s/c, R917 (0.65R, Fusible) o/c. | 14-09-04 |
| Alba | CTV4808 11AK19 | Comes on in st/by then if button pressed blinks pale green | Check R914 47R safety res & TDA6108JK | 14-09-04 |
| Alba | CTV4808 11AK19E3 | No tuning but tuning bar moves | Q501 BF240 - BC548C works in this position | 14-09-04 |
| JVC | 1480 | Dead - When main micro sus | check blue ceramic 3 legged filter | 14-09-04 |
| JVC | 1480 | proc module faulty | caused by 3 legged ceramic filter | 14-09-04 |
| JVC | 1480 | tuner drift | check sm comps | 14-09-04 |
| JVC | 1480EK | Stuck in st/by (timer light?) | 22µ sm cap in stn select module had leaked & broken track between pin 2 of the IC and L001 choke. | 14-09-04 |
| JVC | C1480 | Tuning drift | C016 0µ47 sm in thick film module | 14-09-04 |
| JVC | C1480EK | dead | mains at CON3 but not at LF901 choke. Cracked print by chassis support | 14-09-04 |
|
|
| JVC | C1480EK | St/by only - No HT at LOP | No 5v o/p pin 15 of Stn select module tho' 5v I/p at pin28 & -30v I/p at 34 - module faulty (Pt no SBX-M903A(E) ?44.82 + VAT WVE | 14-09-04 |
| JVC | C1480EK | tuner drift or failure to store chans | station select module SBX-M903A - check sm caps | 14-09-04 |
| Matsui | 1480 | Contrast control has no effect - no remote. | Standby transformer O/C. | 14-09-04 |
| Matsui | 1480 | Dark pic | C509 470µ 16v | 14-09-04 |
| Matsui | 1480 | DARK PICTURE | CHECK 10V LINE FOR 50HZ C509 ( 47uF ) | 14-09-04 |
| Matsui | 1480 | Dead | STR50103A o/c also can be caused by R502/3 330k start up res o/c | 14-09-04 |
| Matsui | 1480 | Dead | STR50103 o/c - no other faulty components | 14-09-04 |
| Matsui | 1480 | Dead. | Replace STR50103 , SR2M , 2SD2105 , 6R5 7W. | 14-09-04 |
| Matsui | 1480 | Int no teletext & blank raster. | Replace X901 6MHz Xtal. | 14-09-04 |
| Matsui | 1480 | No raster or sound. | Replace line IC & clean the film on the nearby print. | 14-09-04 |
| Matsui | 1480 | No remote or LED lights - contrast con U/S. | Standby transformer O/C. | 14-09-04 |
| Matsui | 1480 | No signals | T101 pri winding o/c | 14-09-04 |
| Matsui | 1480 | No sound or raster. | Replace line IC & clean the film on the nearby print. | 14-09-04 |
| Matsui | 1480 | No sound or raster. | Check for sticky film around line chip. | 14-09-04 |
| Matsui | 1480 | No sound/raster - no line drive | Clean sticky glue around line osc chip | 14-09-04 |
| Matsui | 1480 | Partial field collapse | µ1378H field o/p chip faulty | 14-09-04 |
| Matsui | 1480 | PICTURE DARK ADJUSTING A1 CONTROL HELPS BUT STILL | C509 470uF 16v | 14-09-04 |
| Matsui | 1480 | STILL DEAD AFTER REPLACING D508 ( R2M ) , STR50103 A | Q108 | 14-09-04 |
| Matsui | 1480 | STUCK IN STANDBY | C107 DRY | 14-09-04 |
| Matsui | 1480A | Dark pic with no brightness control | C483 4µ7 50v in beam lim | 14-09-04 |