| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Goodmans | TVC146TWS Pan TX14GV1 | Dead - relay slowly clicking | standby I.C. I807 a TOP210PFI and C840 47mfd | 14-09-04 |
| Panasonic | TX14GV1 | Dead with mains relay clicking continuously. | Replace 47uF 25V (C840) in standby supply circuit. | 14-09-04 |
| Panasonic | TX14GV1 | No pic - int comes on with bang - sound ok | Invisible crack in print at LOPTr coll | 14-09-04 |
| Panasonic | TX14GV1 | text lines on the top | EAROM IC703 FAULTY, PART NO. AT24C0810PC | 14-09-04 |
| Panasonic | TX14GV1 Daewoo CP421 | Relay clicking No sound or vision | Check C840 47mfd and I807 TOP210PFI | 14-09-04 |
| Panasonic | TX14GV1 Z421V | Int reverts to st/by | Replace TOP210PFI standby control chip (I807) and I.R. Receiver module (IQ01 | 14-09-04 |
| Panasonic | TX14GV1L | Locking up | The official remedy for this fault from Panasonic is to replace both the main microprocessor (I701) and the EAROM (I703). The new part numbers for these are:-
I701 MS5457CU1, I703 X24C-14GV1 | 14-09-04 |
| Philips | GR1AX 14GR1221 | Dead | resistor 3300 4R7 o/c.cap 2301 4,7uF 350V s/c on multi voltage pcb | 14-09-04 |
| Philips | GR1AX 14GR1227/05B | Dead - HT at 1.5v at power supply whistling | Replace SF2D41 protection thyristor (6641) | 14-09-04 |