| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Sharp | DV51083 | Dead | C710 1000µ 25v, C734 100µ 25v hi esr | 14-09-04 |
| Sharp | DV51083 | Weak R when heated | Set up grey scale via hset | 14-09-04 |
| Sharp | DV51083 D3000 | Dead - HT ok when LOP dis'd | LOPTx faulty | 14-09-04 |
| Sharp | DV51083 D3000 | Tripping continously - int originally | C715 2200 16v LT res cap low cap | 14-09-04 |
| Sharp | DV51083 D3000 | Trips after LOPTx replacement | FOP chip TDA8175 s/c & supply res 1R o/c | 14-09-04 |
| Sharp | DV51083H | Tripping & various faults | Fault on digital sub panel (uses the ITT Digit 2000 chipset) & is very unreliable - as each chip costs ?20+ & entire panel replacement is advised by Sharp (?200) - repair is usually uneconomic | 14-09-04 |
| Sharp | DV51083H D3000 | Dead - HT present | C715 1000mfd 16v in 5VM supply | 14-09-04 |
| Sharp | DV51083H D3000 | Dead. When the collector of the 2SD1546 line outpu | The line output transformer was faulty. Fit a replacement and power the set up slowly via a variac. If at about 100V input th | 14-09-04 |
| Sharp | DV51083H D3000 | Faint raster which can't be turned off by R/C or hor bars | C1485 47µ 50v, C1442 10µ 16v on dig vid panel. Also change C732 & C710 in 5v supply & C719 1000µ 6.3v in 5VM supply | 14-09-04 |