| Make | Model | Problem | Solution | Date |
| | | |
| Found: 7
|
| Sharp | 51CS03 | Slow start up then st/by only | C712 220µ 25v | 14-09-04 |
| Sharp | 51CS03H | No / int field collapse | Resolder L501 ( joints on body ) | 14-09-04 |
| Sharp | 51CS03H 59CS03H | Field fault , or general modification . | Add 1N4148 from emitter Q509 to cathode D513 ( cathode to E Q509 . Pt No RH-DX0045BMZZ ) . Change R534 for 390R ( Pt No VRS-T | 14-09-04 |
| Sharp | 51CS03H 59CS03H | Int bleep from speakers or int no sound ( when hot | Add wire link from pin 22 IC301and pins 28 , 29 ( Gnd ) | 14-09-04 |
| Sharp | 51CS03H 59CS03H | Int flyback lines ( may be red , greeen or blue ) | Flux becoming conductive on Q870 , 871 , 872 . remove transistors , clean pcb and transistors and replace . | 14-09-04 |
| Sharp | 51CS03H 59CS03H | Stuck in StBy . | If no 300v across C708 check for continuity from D704 cathode to L703 . PCB sometimes damaged in transit . | 14-09-04 |
| Sharp | CS 51CS03H | Long time to come on or reverts to st/by | C714 1000µ 10v & check for dry joints | 14-09-04 |