| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Grundig | CUC5350 | No sound at sw on; if vol + on R/C operated sound returns for duration of button press | Aerial socket loose was reputed to be the cause !!! (socket came adrift) | 14-09-04 |
| Grundig | CUC5350 | white lines & 2 of each r-g-b- lines on top 3 ins of screen | Check HT & replace C538 47u 35v | 14-09-04 |
| Grundig | CUC5350 CUC5360 | "P1" DISPLAYED AFTER PROCESSOR CHANGED | R836 FROM 10K TO 22K ( OLD SDA 20562 A 006 NEW SDA 20562 A 506 Grundig 8305-157-580 ) | 14-09-04 |
| Mitsubishi | CT1535TX | stuck in st/by - red light only | Replace STR54041 - only works properly with Mitsi version | 14-09-04 |
| Nokia | 5354UKSFN | Crackle on NICAM sound | MSP2400 sound proc IC & reset eeprom values | 14-09-04 |
| Philips | 52ZY3535 Anubis B AA | No pic, sound ok with faint burning smell | No Filed - replace overheated R3452 4R7, R3450 3R9 & IC7400 TDA3653B | 14-09-04 |
| Philips | Anubis A 52ZY3535 | To exit Demo Mode | Press Prog - & + together at sw on | 14-09-04 |
| Toshiba | 2535 | DEAD , POWER SUPP IN OVERVOLTS MODE , 11v HT INSTEAD | CHECK IC670 , D670 - 675. TA8218AH ( VOLTS AT PIN 9 OF IC801 VARY , 5-8v. OP VOLTAGE CONTROL LOOP INOPERATIVE AS IC826 HAS NO S | 14-09-04 |
| Toshiba | 2535DB | Int sync | dry joints on /or xtal ZF01 27Mhz on Txt pcb | 14-09-04 |