| Make | Model | Problem | Solution | Date |
| | | |
| Found: 7
|
| Hitachi | C2565TN | Int shut down caused by high HT | Change R952 68k in psu to reduce HT to normal 144v | 14-09-04 |
| Hitachi | C2565TN | No pic with flyback lines | IC1410 faulty | 14-09-04 |
| Hitachi | C2565TN | Reverts to st/by at sw on - will come on if coaxed | R952 68k, R953 82k, R954 8k2 in PSU | 14-09-04 |
| Hitachi | C2565TN | SET SHUTS DOWN INT. ON LOSS OF LINE SYNC OR IF VCR | HT TOO HIGH ( NOT 144v ) R952 68k HIGH | 14-09-04 |
| Hitachi | C2565TN, C2574TN etc | Trips under certain pic conditions & on VCR playback | R952 68k, R953 82k, R954 8k2 & check for dry joints | 14-09-04 |
| Sanyo | CBP2565 | Dead - LED alight | Q724 2SA608 in psu s/c | 14-09-04 |
| Sanyo | CBP2565 E3 | Dim pic with flaring - HT low | Thick film sensing unit faulty - unavailable but a replacement can be made on vero board - source TV Mag | 14-09-04 |