| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Barlows | CB672 | N/S pincushion error | chech 4 trs on pincush pcb & C6,10,12 and L1 (24R in cct) | 14-09-04 |
| Bush | WS6672 | Blank white raster with fback lines aft replacing LOPTr | No 220v to RGB as RD12 15R on main pcb to left of LOPTx o/c due to previous dry joint on scan coils had blown LOPTr | 14-09-04 |
| Bush | WS6672 | Dead & tripping | LOPTr BU508SAF s/c & CD08 560nF 250v o/c in E/W mod | 14-09-04 |
| Bush | WS6672 | Dead with burning smell | Mains sw burnt - can use Wharfedale sw pt no MS32 from CHS | 14-09-04 |
| Bush | WS6672 | E/W burn up | RV38 22R o/c & BY228 E/W Diode s/c | 14-09-04 |
| Grundig | Super color 8472/8672/8272/8872/9272 | R621(6,2ohms) smokes immediately after switch-on. | Replace thyristor Ty503 type17127 | 14-09-04 |
| Grundig | Super color 8472/8672/8272/8872/9272 | R621(6,2ohms) smokes immediately after switch-on. | Replace thyristor Ty503 type17127 | 14-09-04 |
| Grundig | Super color 8472/8672/8272/8872/9272 | Won't search. | Pin 5 of syntheseizer module, should have 3,5 volts. If not, change R4111 (1,8 volts). | 14-09-04 |
| National | CN672 | Tripping | R528 100R o/c, C511 33mfd off pin 7 line osc chip | 14-09-04 |