| Make | Model | Problem | Solution | Date |
| | | |
| Found: 6
|
| Sony | AE-2 KVX2562U | dead, no LED, fuse Ok | R610 120k and R612 430k gone high (do not forget to discharge smoothing cap) | 14-09-04 |
| Sony | AE-2 KVX2562U | frame collapse | IC501 (875950646) u/s. A new plastic rivet to clamp IC heatsink to main heatsink may be required, part 7481213400 | 14-09-04 |
| Sony | AE-2 KVX2562U | LED flashing error 2 | B board not seated correctly due to wiring harness being positioned under board | 14-09-04 |
| Sony | AE2 KVX2562U | Blank dull green raster - slight pic noticed if A1 volts critically set, sound etc ok | It’s the CRT! | 14-09-04 |
| Sony | AE2 KVX2562U | Int. unsynchronised text lines flashing all over the picture | Replace IC02 SDA5231-2 on V-board (you can use SAA5231 instead of SDA which is about 10 times cheaper) | 14-09-04 |
| Sony | AE2 KVX2562U | Text & Menu a mass of unsync lines | Orange trimmer CT01 on V-board next to IC02 SDA5231-2. | 14-09-04 |