| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Ferguson | TX91 Thomson 10MH73B 10MG73B | dead | SMD TF21 near LOPTx not soldered in factory | 14-09-04 |
| Ferguson | TX91 Thomson 10MH73B 10MG73B | dead on 12V supply (car supply) | RD09, RD19 22R 0.5W fusible | 14-09-04 |
| Matsui | MB10 | Dead on mains - ok on 12v | 4700pf 2kv cap on print side of board not shown in cct diag was s/c | 14-09-04 |
| Matsui | MB10 | No psu start up | Q805 2SC2120Y leaky - BC639 used in lieu | 14-09-04 |
| Philips | 37TVB10 | Key set | The key set assy has been codified for all b-range tvcr's. This will allow to change the keys without having to change the complete frame. Servicenr.: 4822 410 11076.
Key set for: 37TR120/01/08 - 37TR126/03/38 - 37TR125/38N - 37TVB10/39N. | 14-09-04 |
| Philips | 37TVB10/39N | Codenumber information | A new software version (PTCP2-7) is available for the control uP (IC 7801). Service codenumber is 4822 209 15271.
This new version is only used in the following sets:
14PV263/01, 14PV162/01, 14PV162/05, 14PV162/07, 14PV163/05, 14PV163/05H, 14PV263/01 | 14-09-04 |
| Pye | 25KX1201/05R PB10 | Int collapse. | Check for drys on earth lines , C582 ( 0.01uf ) int s/c. | 14-09-04 |
| Seleco | S21B10 | High HT at 320v instead of 125v | check caps in psu | 14-09-04 |
| Seleco | S21B10 | No sound aft hi HT fault cured | Q601 sm s/c - used BC848 in lieu, DD601/2 o/c & 2 x sm res 1R5 o/c | 14-09-04 |