| Make | Model | Problem | Solution | Date |
| | | |
| Found: 2
|
| Sony | BE4A Chassis | Frame collapse. Replaced frame output chip, but picture geometry was not OK. The voltage at pin 8 of MC44007P chip measured low. | If picture Geometry after replacing Vertical outp. Chip is not in order, replace also MC44007P. (Replaced also STR-S5706 in case an overvoltage caused the fault) | 14-09-04 |
| Sony | BE4A Chassis | Frame collapse. Replaced frame output chip, but picture geometry was not OK. The voltage at pin 8 of MC44007P chip measured low. | If picture Geometry after replacing Vertical outp. Chip is not in order, replace also MC44007P. (Replaced also STR-S5706 in case an overvoltage caused the fault) | 14-09-04 |