Make | Model | Problem | Solution | Date |
| | | |
Found: 11
|
B & O | Hybrid | Teletext - interference. | 4 Page lay out. | 14-09-04 |
GEC | Hybrid | No colour when correctly tuned in. | C341 , TR327 , C319. | 14-09-04 |
Korting | Hybrid | No blue. | R173 ( 1k5 ) o/c. | 14-09-04 |
Korting | Hybrid | Sound - unmodulated. | R608 , C751. | 14-09-04 |
Orion | TV700BR CTN-AA | Tripping with LED flashing in time | Fit dummy load to HT supply - removing pin 1 LOPTX gave 101v - LOPTx u/s - grey type Part Number OR312813820411available from CPC @?21 +vat | 14-09-04 |
Philips | BR1-AX | No Col | R3755 (10R) fusible resistor on
one of the 12v rails being o/c. | 14-09-04 |
Sanyo | CBR2148 | Replacement of TDA4505M - NLA | Use TDA4505E & change R136/121 to 470k & adj AFC as nec | 14-09-04 |
Siemens/Blaupunkt | Chassis100/21 (Control section with hybrid Siemens Ics) | Set can not be switched to Stby with the remote control. All other functions O.K | Switch the TV to Stby from the on/Stby switch on the front panel.Hold down the"ME" button and switch the TV on.Press CS. It should work normally now. | 14-09-04 |
Siemens/Blaupunkt | Chassis100/21 (Control section with hybrid Siemens Ics) | To set normal values for Bright/Contr/Col/Volume | Switch set to Stby. Hold down "ME"button, until set switches on. Adjust bright,contr etc and press "ME" again to memorise. | 14-09-04 |
Siemens/Blupunkt | Chassis100/21 (Control section with hybrid Siemens Ics) | Set can not be switched to Stby with the remote control. All other functions O.K | Switch the TV to Stby from the on/Stby switch on the front panel.Hold down the"ME" button and switch the TV on.Press CS. It should work normally now. | 14-09-04 |
|
Siemens/Blupunkt | Chassis100/21 (Control section with hybrid Siemens Ics) | To set normal values for Bright/Contr/Col/Volume | Switch set to Stby. Hold down "ME"button, until set switches on. Adjust bright,contr etc and press "ME" again to memorise. | 14-09-04 |