Make | Model | Problem | Solution | Date |
| | | |
Found: 14
|
Grundig | CUC40 | Frame collapse. | D2758. | 14-09-04 |
ITT | CB9604 CVC40 | Flyback lines - A1 control not working. | R46/48 ( 820k ) on main PCB o/c. | 14-09-04 |
ITT | CB9604 CVC40 | No frame. | T7 ( BC527 ) on CMF40. | 14-09-04 |
ITT | CP332 CVC40 | Dead - Intermittent shut down. | BU208A loose bolt. | 14-09-04 |
ITT | CP332 CVC40 | Frame collapse. | R2003 ( 1k ) field hold control o/c. | 14-09-04 |
ITT | CVC40 | Dead - blowing BU126. | R808 , R809 , R829 , R833 , R818 on CMP may be marked R8 , 9 ect | 14-09-04 |
ITT | CVC40 | Dead - No results. | R808/9 ( 220k ) , R806 ( 470k ) on CMP40 may be marked R8 , 9/6 | 14-09-04 |
ITT | CVC40 | Dead. | Drys on pin 14 of LOPTX. | 14-09-04 |
ITT | CVC40 | Dead. | R809 o/c. | 14-09-04 |
ITT | CVC40 | Int Dead. | Drys on pin 14 of LOPTX. | 14-09-04 |
|
ITT | CVC40 | Intermittent or no colour. | R1003 ( 2.7k ) o/c. | 14-09-04 |
ITT | CVC40 | Small picture - ok after 10 mins. | C11 ( 22uf , 375v ) 127v rail down to 108v. | 14-09-04 |
ITT | CVC40 | Tripping. | R808/9 ( 220k ) high , D8/10 ( 1N4148 ) leaky. | 14-09-04 |
Magnavox | RS2756 C402 | No power to magnavox tv model# RS2756 C402 chassis 28Y100-00AA.
No lights, noise, etc. Dead. | Is the main fuse blown?
If yes, there's a problem in the primairy side of the power supply.
If no, check the following:
1) Do you have 300/160V over the main capacitor.
2) Is the primairy-power-transitor "working"?
| 06-07-05 |