| Make | Model | Problem | Solution | Date |
| | | |
| Found: 11
|
| Grundig | CUC4511 | Thin hum bar causing cogging | TDA8140 faulty or C527 | 14-09-04 |
| ITT | CVC45 | Dead - blows BU. | R833 | 14-09-04 |
| ITT | CVC45 | Dead - no results. | T807 ( BU126 ) s/c. | 14-09-04 |
| ITT | CVC45 | Dead. | BU126 , replace R808 , R809 , R818 , R829 , R833 | 14-09-04 |
| ITT | CVC45 | No picture , sound ok. | R12 ( 560R ) | 14-09-04 |
| ITT | CVC45 | No picture intermittent. | Dry joint pin 1 of Loptx. | 14-09-04 |
| ITT | CVC45 | No raster. | DJ on pin 1 of LOPTX. | 14-09-04 |
| ITT | CVC45 | Raster - blank - no picture. | R12 ( 560R ) no line pulses at pin 8 of TBA560 | 14-09-04 |
| ITT | CVC45 | Raster - blank - sound Ok. | R12 ( 560k ) feed to decoder high | 14-09-04 |
| ITT | CVC45 | Raster - Intermittent no raster. | DJ on pin 1 of LOPTX. | 14-09-04 |
|
|
| ITT | CVC45 | Startup - starts then goes dead. | R809 ( 220k ) o/c. | 14-09-04 |