| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Sharp | CA10 66DS03H | BOTTOM HALF OF PICTURE OK TOP IS LINES WITH E/W DIST | REPLACE F601 NEAR LOPTX | 14-09-04 |
| Sharp | CA10 66DS03H | Dead | Dry joint & o/c C613 680n & res across it o/c- to rt of Loptx | 14-09-04 |
| Sharp | CA10 66DS03H | Dead - LOPTr Q602 BUH515 s/c | C604 | 14-09-04 |
| Sharp | CA10 66DS03H | Dead with whine from psu | Dry joints C613 680n - replace cap & resistor across it | 14-09-04 |
| Sharp | CA10 66DS03H | Field - bottom ok top squashed with lines | F601 N27 2.5A fuse | 14-09-04 |
| Sharp | CA10 66DS03H | No control via front or remote | R705 68k st/by 5v feed | 14-09-04 |
| Sharp | CA10 66DS03H | NO REMOTE OR FRONT FUNCTIONS | CHECK R704/705 FOR O/C OR HIGH VALUE SHOULD BE 68K | 14-09-04 |
| Sharp | CA10 66DS03H | St/by only | LOPTr s/c due to almost invisible dry joints on scan coil conn | 14-09-04 |
| Sharp | CA10 66DS03H | STUCK ON 1 CHANNEL, NO REMOTE OR FRONT FUNCTIONS | REPLACE R705 68K | 14-09-04 |