| Make | Model | Problem | Solution | Date |
| | | |
| Found: 13
|
| Akai | CT2125 | Comes on with chirping noise & st/by led on then trips out after 1/2 min | C817 100µ 25v | 14-09-04 |
| Akai | CT2125 | Int blank raster with fb lines | OK when con TD203 on txt pcb removed - TZ01 27Mhz Xtal | 14-09-04 |
| Mitsubishi | CT2125TX | Dead - standby light flashing. | HT @ 35v , D961 ( 6.2v zener ) leaky. | 14-09-04 |
| Mitsubishi | CT2125TX | Dead. | D909 ( 3v zener ) s/c. | 14-09-04 |
| Mitsubishi | CT2125TX | Int blowing line transistor. | STR54041 , clean & resolder pins of line driver transformer. | 14-09-04 |
| Mitsubishi | CT2125TX | Large black square int covers screen, floats left or right & int poor contrast | C959 100µ 25v hi esr causing low 5v supply from reg - also check C964 10µ 50v, C962 100µ 50v, C905 470µ 25v | 14-09-04 |
| Mitsubishi | CT2125TX | No sound mute. | D361 ( 1N4148 ) | 14-09-04 |
| Mitsubishi | CT2125TX | No video | Z951 630ma fusible link in 8.5v line on psu | 14-09-04 |
| Mitsubishi | CT2125TX | SLIGHTLY OFF TUNE | REPLACE IC101 | 14-09-04 |
| Mitsubishi | CT2125TX | Sound - will not tune right down or mute. | D361 ( 1N4148 ) leaky. | 14-09-04 |
|
|
| Mitsubishi | CT2125TX | Sound wont go off | Pin 4 audio chip hi at 2.3v (0.3v) - D361 1N4001 leaky | 14-09-04 |
| Mitsubishi | CT2125TX | Tuning slightly off - unable to fine tune | IC101 MS1496P | 14-09-04 |
| Mitsubishi | CT2125TX | user settings wont store | minus30v pin 2 eeprom IC702 low. C962 leaky also check other electros | 14-09-04 |