| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Mitsubishi | CT2153 CT2155 | GHOSTING RINGING OR INT PIC | CHECK FOR DRYS NEAR SAW FILTER L4 L5 OR FIT MOD KIT AFT1 | 14-09-04 |
| Mitsubishi | CT2153STX | Comes on in st/by - will sw on but no memory of chans or analogue levels | 30v supply to EEPROM low at approx 20v - C962 100µ 50v | 14-09-04 |
| Mitsubishi | CT2153STX | Dead with red LED lit | 110v prot zener s/c. Changed C908 10µ 100v & C909 47µ 50v & STR59041 & check hi value res in psu pri | 14-09-04 |
| Mitsubishi | CT2153STX | Int fluctuating pic with bright flashes for first 1/2 hr | Glue on VC/RGB/CTI pcb at top bracket become resistive - remove glue | 14-09-04 |
| Mitsubishi | CT2153STX | Lines across top half of pic - clears when heated | sec PSU caps C920 470uF/25V, C925 10uF/25V, C923 100uF/10V, C922 100uF/25V | 14-09-04 |
| Mitsubishi | CT2153STX | No chan or analogue value store | Check pin 2 IC702 EEPROM chip. If not 30v then check C962 100µ 50v | 14-09-04 |
| Mitsubishi | CT2153STX | NO GREEN ANALOGUE DISPLAY | FRONT MICRO ic.701 | 14-09-04 |
| Mitsubishi | Euro 4Z CT2153STX | Flashing pic for first hour | Carbonised glue on RGB panel - remove | 14-09-04 |
| Panasonic | Euro 4Z CT2153STX | Dead with Q551 LOPTr s/c | Fit repair kit TZS9EK001 | 14-09-04 |