| Make | Model | Problem | Solution | Date |
| | | |
| Found: 3
|
| Mitsubishi | CT25M2TX | EXCESSIVE WIDTH WITH BENT VERTICALS | CHECK FOR DRY JOINTS ON C558 WHICH CAUSES IC5E1 AND L555 TO FAULT | 14-09-04 |
| Mitsubishi | CT25M2TX | No E/W control with excess width | Dry joint C558 caused failure of IC5E1 TEA2031A on E/W pcb & L555 s/c turns (should read 80R) Pt no MITS409P749010 | 14-09-04 |
| Mitsubishi | CT25M2TX | OK at sw on then no osg aft 30sec. Aft 5mins blank raster for 10sec on chan change or adj Vol | If freezing field chip IC454 AN5521 works ok - chip faulty | 14-09-04 |