| Make | Model | Problem | Solution | Date |
| | | |
| Found: 11
|
| Sharp | CV2133H | dead set standby light comes on and dies away | C723 4µ7 non pol cap | 14-09-04 |
| Sharp | CV2133H | Field collapse | IC801 IX0712CENI or M51390ASP jungle chip | 14-09-04 |
| Sharp | CV2133H | Int blank white raster & no sound | T207 int earthing short - fault will come & go whilst squeezing it | 14-09-04 |
| Sharp | CV2133H | Int white picture + no audio | Check each coil in IF strip for int short to screening can | 14-09-04 |
| Sharp | CV2133H | NO SYNC | Q1603 ON SCART PCB | 14-09-04 |
| Sharp | CV2133H | No sync | Q1603 on scart panel - 2SA950 fitted - use 2SA966 for greater reliability | 14-09-04 |
| Sharp | CV2133H | Txt lines on top 2" of screen | C502 22µ 25v near fop chip | 14-09-04 |
| Sharp | CV2133H 8P-SR | Dead - brief red LED at sw on | Check caps C714 10µ 100v, C716 47µ 63v & C723 3µ3 50v non pol on psu pri | 14-09-04 |
| Sharp | CV2133H 8P-SR | Txt lines showing | C502 220µ 25v hi esr | 14-09-04 |
| Sharp | CV2133H 8PSR | Trips once then dead | C723 3µ3 63v bipolar cap - fitted 2 x 4µ7 63v back to back in lieu | 14-09-04 |
|
|
| Sharp | CV2133H 8PSR | watermark effect | C318 220µ 25v LT cap | 14-09-04 |