| Make | Model | Problem | Solution | Date |
| | | |
| Found: 6
|
| Sharp | CV3707HD 5PSR1 | St/by only - psu o/ps correct | No line drive to Q601 as Q605 sw off by micro. By operating switch SI011 set works without man or R/C. Micro IX0714CE faulty | 14-09-04 |
| Sharp | CV3707HD 5PSR1 | STUCK IN STBY NO LINE DRIVE DUE TO Q605 BEING TOL | PRESS SWITCH S1011 IF SET STARTS LOPT STAGE OK . | 14-09-04 |
| Sharp | CV3730H | CHILD LOCK | TO RELEASE CHILD LOCK PRESS AND HOLD VOLUME DOWN BUTTON ON TV, THEN PRESS CHILD LOCK BUTTON TEN TIMES FOLLOWED BY THE BLEU MODE KEY THEN RELEASE THE VOLUME KEY | 14-09-04 |
| Sharp | CV3730H | child lock on, customer forgotten pin code | press and hold Vol- on the front of TV, press the child lock button 10 times followed by the blue mode button, release the Vol-. Now a new code can be entered. | 14-09-04 |
| Sharp | CV3730H | Reverts to st/by after 10 secs - ok with no signal connected | R623 1M2 in beam lim o/c | 14-09-04 |
| Sharp | CV3730H | Screeching from LOPTx then reverts to st/by | CRT soft | 14-09-04 |