| Make | Model | Problem | Solution | Date |
| | | |
| Found: 10
|
| Akura | CX26 | Dead no sec volts from PSU | C812 1µ 50v, C815 220µ 35v, C821 22µ 63v | 14-09-04 |
| Akura | CX26 | Field foldover at top | C303 100pF | 14-09-04 |
| Akura | CX26 | Int dead/blank raster/txt etc | dry joints on dig sigs pcb links esp link J746 under IC703 | 14-09-04 |
| Akura | CX26 | INT FAULTS VARIOUS !! | DRYS ON DIGITAL PCB J746 LINK UNDER IC703 REMOVES LINE DRIVE | 14-09-04 |
| Akura | CX26 | Int sw off with line foldover as it goes off | Dry joints line scan coil plug | 14-09-04 |
| Akura | CX26 | NICAM OK FM US | IC002 EEPROM US ( SET WILL NEED REPROGRAMMING WITH DEFAULT SETTINGS ) | 14-09-04 |
| Akura | CX26 | No fm sound with video pback | fm sound ok at IC101 pin 5 if chip - enters nicam pcb but does not reappear, IC002 eeprom chip faulty | 14-09-04 |
| Akura | CX26 | Sound absent | EEPROM | 14-09-04 |
| Akura | CX26 | St/by only | HT correct (116v) 5v supply low at 1.4v. C841 470µ 16v | 14-09-04 |
| Akura | CX26 | Wont go into st/by | R804/805 15k go low res | 14-09-04 |