| Make | Model | Problem | Solution | Date |
| | | |
| Found: 7
|
| JVC | CX60GB | AC adaptor no o/p | Q01 2SC2688 o/c | 14-09-04 |
| Samsung | CX-6844N | Partial field collapse | IC301 TDA8350Q, 2 caps not marked 10µ & 100µ 63v, ceramic 10R 5w resistor across pins 3/5 of above chip | 14-09-04 |
| Samsung | CX-6844N | Partial field collapse | IC301 TDA8350Q, 2 caps not marked 10µ & 100µ 63v, ceramic 10R 5w resistor across pins 3/5 of above chip | 14-09-04 |
| Samsung | CX6844N | field - partial collapse | replace TDA8350Q IC301 & 2 caps not marked on pcb 10µ & 100µ 63v & 10R 5w res across pins 3 & 5 of IC301 | 14-09-04 |
| Samsung | CX6844N | field - partial collapse | replace TDA8350Q IC301 & 2 caps not marked on pcb 10µ & 100µ 63v & 10R 5w res across pins 3 & 5 of IC301 | 14-09-04 |
| Sharp | CX68C4NZ | Excess bright raster at sw on then trips off | D631 (RH1), R631 (.33E fusible) open | 14-09-04 |
| Sharp | CX68C4NZ | Excess brightness with fb lines then trips - sound ok | D629 s/c - used BYV95C in lieu & R631 fusible o/c 3E3 1/2w (pin 2 LOPTx) | 14-09-04 |