| Make | Model | Problem | Solution | Date |
| | | |
| Found: 8
|
| Alba | VTV19 Combi | No pic - sound ok | C480 10µ near line dr tr | 14-09-04 |
| Daewoo | Combi | Child lock removal | Press Bule-Yellow-Green-Red within 5-10 secs then press st/by twice | 14-09-04 |
| Ferguson | C3615U Combi | Switches off aft 10 secs with tape jammed | RW002 1R 1w safety res on deck pcb - also check fuse link FW003 (behind on/off sw near white ribbon conn) | 14-09-04 |
| Hinari | VTV100 Combi | Raster - high raster. | Q301 ( 2SA1015 or BC307 ) s/c. | 14-09-04 |
| LG | KE14U73 Combi | Swirling lines & static pops on pic | poor earthing of the deck to the screen large VCR screening can | 14-09-04 |
| Philips | 14PV182 combi | Dead with tape stuck in machine | LOPTx | 14-09-04 |
| Philips | 14PV284 Combi | Some buttons on handset not working | It should be noted that the VCR buttons on the remote can be set to VCR 2 coding although this is not a documented feature. This will result in the VCR part of the Combi not working via remote. Pressing 'STOP' and '2' together on the remote changes the code to VCR 2. Pressing 'STOP' and '1' together on the remote will change the code back to VCR 1. The TV controls are unaffected.Removing the batteries and pressing any button then refitting the batteries will also set the code back to VCR 1.
Note that the remote should be set to VCR1 for the VCR buttons to work the Combi. | 14-09-04 |
| Philips | Combi | Remote control not responding | Check not set to VCR2 - press Stop & 1 together or removing batts will restore VCR1 setting | 14-09-04 |