Make | Model | Problem | Solution | Date |
| | | |
Found: 14
|
Decca | D21TD6 | No red | R912 | 14-09-04 |
Ferguson | D68N | NO BLUE | REPLACE RB71 1.5K OHM | 14-09-04 |
FERGUSON | D68N | NO VIDEO FROM TUNER OR SCART SOCKET | REPLACE TX09 BC858 (SMD) | 14-09-04 |
Ferguson | D68N | Various micro lock up - int no sound & entering install menu at random | Replace EEPROM & front membrane & set up | 14-09-04 |
Ferguson | ICC9 D68N | No B | RB71 1k5 o/c | 14-09-04 |
Ferguson | ICC9 D68N | No Video at AV skt or tuner | TX09 BC858B sm leaky | 14-09-04 |
Finlandia | C/D66KZ6 Nokia Eurostar | Width excessive | C514 dry joint | 14-09-04 |
Finlandia | C/D66KZ6/F Eurostereo CHA2 | stuck in st/by, if you try to switch it on, chan 1 appears in display for 5 secs then reverts back to st/by with green led flashing on front. | line driver transistor faulty | 14-09-04 |
Granada | CD66JS | Field collapse | dry joints scan coil plug | 14-09-04 |
Granada | CD66JS | lines - red at top of screen | C703 100µ next to TDA8170 field op chip | 14-09-04 |
|
ITT | CD652 CVC25/3 | Channels - stuck on channel 1. | C5 leaky. | 14-09-04 |
Kioto | FD6943 | Dead - Lop tr s/c | C910 10µ 50v, C909 47µ 25v (sounds like an Onwa) | 14-09-04 |
Tatung | D Series T21TD61 | St/by only | corrupted EEPROM due to arcing on scan coil connector. To reset EEPROM, s/c 2 contacts PL701 (RH side Micro IC702) & press P+ on front panel, LED should blink once. Remove s/c & press P+ button again, the set should come on. | 14-09-04 |
Tatung | T21TD60 | No line drive | R427 o/c, Tr402 s/c | 14-09-04 |