| Make | Model | Problem | Solution | Date |
| | | |
| Found: 8
|
| Decca | E series D28NEE5 | Audio gives 3 pops when turned off from st/by Attempting to start from residual charge | Remove R803 & 804 47k from pcb & connect together in R804 posn. Fit wire on copper side of pcb (?) - Official mod from Decca but not explained very well. | 14-09-04 |
| Decca | E series D28NEE5 | Brightness fluctuates rapidly with poss fb lines | C527 100n next to IC501 faulty | 14-09-04 |
| Decca | E series D28NEE5 | Dead when cold - ok when heated | 5v rail low - IC804 5v reg | 14-09-04 |
| Decca | E series D28NEE5 | E/W poor & Width excessive after FOP repair | ZD409 33v zener leaky - not shown on cct diag - pin 11 IC401 to earth | 14-09-04 |
| Decca | E series D28NEE5 | Excess width/lack of height - int cuts out when heated | HT high at 177v (150v), R814 75k in HT pot divider | 14-09-04 |
| Decca | E series D28NEE5 | Field collapse | R422 1R2 fusible o/c off pin 6 LOPTx | 14-09-04 |
| Decca | E series D28NEE5 | Field foldover with lines at top | R437 1R2 o/c | 14-09-04 |
| Decca | E series D28NEE5 | | | 14-09-04 |