| Make | Model | Problem | Solution | Date |
| | | |
| Found: 8
|
| Crown | CTF1401R | Field collapse | R200 4R7 feed to D200 FOP supply o/c - no other FF | 14-09-04 |
| Crown | CTF142 RSL | Crown CTF142 TV when powered on displays a white horizontal line in the center of the screen. Upon inspection i discovered that Resistor R625 was fried. However i cannot see the code as it has burnt away. Id be greatfull for any help. Also would i need to | replace vertical ic w/ corresponding passive components like cap./
resistor r625 is fusible resistor like 0.5 ohm. | 25-06-05 |
| Crown | CTF14R | St/by only - LED lit | R521 100k near HT sw trs | 14-09-04 |
| Crown | CTF14R/T | Dead - LOPTx squealing - blows LOPTr | C261 22nF leaky | 14-09-04 |
| Ferguson | F14VB12A | Sound int lost | IS001 switching chip 101-22-010 | 14-09-04 |
| Fidelity | F14 | Int start up | Chopper BU508A dry joints & R84 15k 5w hi res | 14-09-04 |
| Fidelity | F14 | No signals/search | Check switches on back of set not stuck down | 14-09-04 |
| Harwood | HTF142SL | Dead - LOPTx squealing - blows LOPTr | C261 22nF leaky | 14-09-04 |