Make | Model | Problem | Solution | Date |
| | | |
Found: 13
|
Goodmans | F19 W288NS | Dead | Sw mode Trfmr o/c feedback winding | 14-09-04 |
Goodmans | F19 W288NS | Dead | R170 0R1 in 26v supply o/c | 14-09-04 |
Goodmans | F19 W288NS | Dead - mains fuse blasted | Mains rects s/c & chopper transformer shorted also TDA4601 chopper chip | 14-09-04 |
Goodmans | F19 W288NS | Dead - no o/p from PSU | L13 not soldered properly | 14-09-04 |
Goodmans | F19 W288NS | Dead - very low volts on IC14 in smps | D36 BA157 s/c in psu | 14-09-04 |
Goodmans | F19 W288NS | Dead with HT between 5 - 100v with chopper Tr overheating | D37 1N4148 leaky or s/c | 14-09-04 |
Goodmans | F19 W288NS | E/W fault & lack of width | C71 1UF 100v (very bulged and burnt) + L20 10m/h coil | 14-09-04 |
Goodmans | F19 W288NS | No sound | R231 o/c & C050 u/s | 14-09-04 |
Goodmans | F19 W288NS | St/by only | R177 1R in 16v supply o/c | 14-09-04 |
Goodmans | F19 W288NS | St/by only | D37 1N4148 s/c, C108 1µ 100v o/c | 14-09-04 |
|
Goodmans | F19 W288NS | Tripping | SMPS Tx Pt no FORM88700402149 | 14-09-04 |
Goodmans | F19 W288NS | Width closes in gradually then LOPTr goes s/c | Dist line dr wfmr caused by Line dr trfmr - was able to clean/resolder pins | 14-09-04 |
Goodmans | F19 W288NSA | No sound just a crackle & buzz | IC3 TDA9875A on NICAM PCB | 14-09-04 |