| Make | Model | Problem | Solution | Date |
| | | |
| Found: 9
|
| Philips | GFL2.20E 29PT828C | dead | R3528 39k o/c | 14-09-04 |
| Philips | GFL2.20E 29PT828C | dead, green LED flashing | R3148 120k gone high (large signal panel) | 14-09-04 |
| Philips | GFL2.20E 29PT828C | dead, LED flashing | Frame IC TDA8177 and C2260 100uF 63V | 14-09-04 |
| Philips | GFL2.20E 29PT828C | no sound from front speakers in dolby or surround modes | go to install menu, then TV config menu and set "external amp" to off | 14-09-04 |
| Philips | GFL2.20E 29PT828C | quiet buzz from centre speaker when playing back VCR via SCART | unclip the features board mounted behind the LOPTx on a plastic frame, turn through 180 degs and clip back into its frame (it works) | 14-09-04 |
| Philips | GFL2.20E 29PT828C | set trips from green LED to red, then back green to red | IC 7540/7550 TDA2616Q on audio PCB | 14-09-04 |
| Philips | GFL2.20E 29PT828C | sound int. goes low and distorted, rear speakers crackling | resolder earth links on component side of dolby module | 14-09-04 |
| Philips | GFL2.20E 29PT828C | stuck in stby | resolder both ends of scan coils leads and resolder LOPTx | 14-09-04 |
| Philips | GFL2.20E GFL2.3E | Dead | LOPTr s/c, FET 7480 IRF620 faulty - caused by C2423 390nF 215v short circuit.
| 14-09-04 |