| Make | Model | Problem | Solution | Date |
| | | |
| Found: 7
|
| Goodmans | GTV66W 1 11AK19 | Blank raster | small RGB panel on CRT pcb had broken print (not surprising as it gets a lot of physical strain) | 14-09-04 |
| Goodmans | GTV66W 1 11AK19 | Bright white raster at sw on then trips off | No volts to TDA6107Q RGB o/p chip on crt base as 47R safety res R914 on base o/c - dry joint on A1 conn of crt base & others probably caused it | 14-09-04 |
| Goodmans | GTV66W1 11AK19 | Dead - LOPTx s/c, when replaced, E-W errors | D611 (BY299) was leaky | 14-09-04 |
| Goodmans | GTV66W1 11AK19 | E/W dist | Dry joint C613 12nF, R629 27R safety res o/c, C630 390nF 250v low cap | 14-09-04 |
| Goodmans | GTV66W1 11AK19 | Narrow pic | C630 dry R629 2.7R burnt. Also replace D612 BY228 | 14-09-04 |
| Goodmans | GTV66W1 11AK19 | Tripping | Audio O/P IC TDA2615 | 14-09-04 |
| Goodmans | GTV66W1 11AK19B-1 | Width reduced & no E-W | C630, R629 2R7 and the BUK444 200A. | 14-09-04 |