Repair tips database, Service Manual free download,schematics,datasheets,eeprom bins,pcb,repair info for test equipment and electronics

Repair tips

Make	Model	Problem	Solution	Date

Found: 3
Thomson	ICC11	TV thomson ICC11 (63DF89L) shut down itself brusquely, the red LED on front panel also led switch off a few seconds after. the TV is in this status during 5 to 15 seconds, after the red led flashing about 5 times and the TV restart (and LEd switch normall	Try to bridge pin 03-04 on IL 001, that way youґll inactivate security-stops of the chassis... The TV will work now. There must be a dammage within the security-circuit of the chassis! Try to repair and allocate the dammage for drive the TV on secure standarts!	02-07-05
Thomson	ICC11 72MK89D	Excess brightness with fb lines	RL128 1M8 in A1 pot divider on dynamic focus module	14-09-04

Thomson	ICC11 72MK89D	Luminance lost	Check with scope pin 14 Pl/skt BV001. If vid signal missing or crushed check T130, 132 & 134 in IF module. If good signal here check vid signal at TV001 under screen in vid module. If no sig here TV681 &/or TV682 can be responsible. If sig at TV001 ok, TV002/3 are faulty	14-09-04

page: 1