| Make | Model | Problem | Solution | Date |
| | | |
| Found: 4
|
| Bush | 6690D (IDTV) | No vol/menu/chan change in normal mode | reset remote unit by pressing left , right, down[cursor keys]and the number one key at the same time for 5 seconds then release.[should this fail to resolve problems similar to above then micro suspect] | 14-09-04 |
| Bush | IDTV | Service mode | 1.Go to standard (analogue) mode.
2.Press "Function" on R/C (under the blue button)
3.Go to INSTALLATION
4.Enter 4,7,2,5. | 14-09-04 |
| Grundig | M82-100IDTV | Tripping - stops if tripler dis'd | Check caps in psu control sub panel for low capacitance | 14-09-04 |
| Grundig | M82-102IDTV | Int cuts out | Chopper trfmr breaking down | 14-09-04 |